Seite 1 von 1
exhaust help
Verfasst: 11 Feb 2006 17:10
von Gast
Hi all its me again.
Building a 1989 zx7r fighter and some one has told me that the zx9r stainless exhaust down pipes will bolt straight on, can any one confirm this.
Best regards
sorry about the English I speak very little German

Verfasst: 11 Feb 2006 18:13
von Gast
The ZX9R exhaust system fits only at the J/k and L/M models... These are the model years from 1991 to 1995...
Verfasst: 12 Feb 2006 18:21
von Gast
Danke

Verfasst: 12 Feb 2006 21:13
von Casi
the question is - from which ZX9R - you`re writing about stainless steel but the exhaust system from `94-`97 (ZX9B-model) isn`t a stainless steel one at all!
If you`re talking about a stock exhaust system it could be from a later model.
I can`t remember anybody writing about later ZX9R exhaust system fitting to the `89 ZXR models!
So maybe you have to check on your own, what is possible. In my opinion it won`t fit `cause your ZXR has the "steering-chain" in the middle between cylinder 2 and 3 and afaik have the newer engines the chain located on the right side.
If you`ve got any question don`t hesitate to ask - but I`m not specialised neither on the H-model,nor on the ZX9R, sorry

Verfasst: 12 Feb 2006 21:31
von Klaus69
Hi nto,
nice to hear from you. Can` t help you with your question. Is it goin straight forward with your bike?
Verfasst: 12 Feb 2006 23:37
von Harm
like casi said.
nothing fits on the '89 zxr.
except 89/90 zxr parts.
Because of the longer distance between cyl. 2+3.
(i think u're talking about the pipes, not the silencer)
Silencers are compatible between all models.
S.
Verfasst: 12 Okt 2006 19:26
von Gast
Sorry, I have been away for a long time :oops:I have been sick
I made a mistake with the year, the bike is a 1991, so a zx9r system will fit?
Thankyou for your help so far.
Danke

Verfasst: 12 Okt 2006 19:40
von Klaus69
Hi nto,
hope your illness was nothing real bad...
If you are working on a J Modell the Pipes from a ZX9 (94-96), called "B" will fit the far I know...
Verfasst: 12 Okt 2006 20:27
von oTHEr
hi nto
welcome back
is it possible to bet some pic´s from your bike?
is the single-sided-swinarm applied?
greetz

Verfasst: 12 Okt 2006 21:42
von Gast
Hi and thank you for the welcome back
Your advise is most welcome
I will post the pictures of the swing arm tommorrow.
Maybe see some of you at Fighterama!??
Verfasst: 12 Okt 2006 22:22
von Gast
here it is, inspired by the geman fighter

Verfasst: 12 Okt 2006 22:41
von Kai
very nice!!

Verfasst: 12 Okt 2006 22:57
von oTHEr
nto hat geschrieben:....Maybe see some of you at Fighterama!??....
for sure...
0600pm sat.11-04-06 at the zxr-area....
hope to meet you
Verfasst: 12 Okt 2006 23:02
von Gast
A different angle

Verfasst: 12 Okt 2006 23:25
von Gast
oTHEr hat geschrieben:nto hat geschrieben:....Maybe see some of you at Fighterama!??....
for sure...
0600pm sat.11-04-06 at the zxr-area....
hope to meet you
We arrive on Thursday, so will be there, Friday and Saturday and Sunday, It is the best bike show in Europe
This will be my 4th year

Verfasst: 18 Okt 2006 20:51
von Gast
Have just purchased a zx9r down pipe and should arrive tommorrow
Just hope it fits

Verfasst: 19 Okt 2006 8:15
von Kai
more pictures!!!
